Comparison of the dentin tubule penetration of AH Plus, WellRoot ST, and MTA BioSeal after obturation, retreatment, and re-shaping of the root canals.

It was aimed to compare the dentine tubule penetration of AH Plus, MTA Bioseal, and WellRoot ST after filling, retreating, and reshaping the root canals by using a novel microscopic method. Seventy-five mandibular incisors with single root canals were shaped with Protaper Next system (PTN; X2-25/0.06) The teeth were obturated with AH Plus labeled with Rhodamin B and MTA Bioseal or WellRoot ST sealer which were labeled with Fluo-3. Then the root canal fillings were removed with Protaper Universal Retreatment files. At the last stage, the teeth were reshaped with PTN (X3-30/0.07). The samples were transversally sectioned and examined using a Cytation 5 reader and Gen5 software regarding the mean and the maximum depth of sealer penetration. No significant difference was observed between the groups, except for the 6 mm level after reshaping the root canals (p < .05). It is not possible to completely remove the sealer remnants from the dentin walls even after reshaping the root canals. RESEARCH HIGHLIGHTS: Even after reshaping the root canals in the retreatment procedure, it is not possible to completely remove the filling residues of the epoxy-resin-based, calcium-silicate-based and MTA-based endodontic pastes from the dentin walls.

Different Dentin Conditioning Protocols on Bond Strength of a Bioceramic Root Canal Filling.

Objective: Bioceramic-based sealers, in combination with bioceramic-coated gutta-perchas, have become more commonly used in root canal obturation. The present study aimed to assess the influence of laser-assisted dentin conditioning compared with conventional conditioning protocols on the push-out bond strength (PBS) of a bioceramic-based root canal filling. Material and Methods: Sixty extracted mandibular premolars with one root canal were instrumented with EndoSequence rotary files up to size 40/0.04. Four types of dentin conditioning protocols were used: 1) 5.25% NaOCl (control), 2) 17% EDTA+5.25% NaOCl, 3) Diode laser-agitated 17% EDTA+5.25% NaOCl, 4) Er,Cr:YSGG laser irradiation+5.25% NaOCl. Teeth were obturated using the single-cone technique with EndoSequence BC sealer+BC points (EBCF). After having obtained 1-mm-thick horizontal slices from the apical, middle and coronal root thirds, push-out test was carried out, and failure modes were determined. The data were analyzed by two-way analysis of variance and Tukey's test with a significance level of p<0.05. Results: The apical segments showed the highest PBS in all groups (p<0.05). In the apical segments, EDTA+NaOCl and diode laser agitated EDTA increased the PBS compared to the control (p=0.0001) and Er, Cr: YSGG laser (p=0.011 and p=0.027, respectively) groups. Both laser-used groups revealed significantly higher PBS values in the middle and coronal segments than EDTA+NaOCl (p<0.05). The bond failure was predominantly cohesive without any significant difference among the groups (p>0.05). Conclusions: Laser-assisted dentin conditioning had distinct effects on the PBS of the EBCF at different root segments. Although Er, Cr: YSGG was ineffective in the apical segments, generally, laser-assisted dentin conditioning affected PBS more favorably than conventional irrigation groups, with a more pronounced effect in the diode laser-agitated EDTA group.

Evaluation of oral health in different types of diabetes mellitus: A cross-sectional retrospective study.

OBJECTIVE: It was aimed to compare the relationship between oral health and two types of diabetes mellitus (DM) using laboratory findings and oral health parameters. MATERIAL AND METHOD: This retrospective study was conducted between 2021 and 2022. Type-I and Type-II diabetic patients who had laboratory findings and panoramic radiograph taken on the same day was included to the study. HbA1c, glucose, urea, LDL, HDL, AST, ALT, triglyceride, creatinine, positive and negative microalbuminuria levels on laboratory tests and, the number of root canal treated, missing, filled and decayed tooth on the panoramic radiograph were recorded. The obtained data were compared statistically to evaluate the association between diabetes type and oral health. RESULTS: A total of 101 patients, 51.5 % (n = 52) with Type-I diabetes and 49.5 % (n = 49) with Type-II diabetes, were included. The number of males (53.8 %) in Type-I DM group and the number of females (67.3 %) in Type-II DM group were statistically higher. The mean age of Type-II diabetic patients was higher than Type-I diabetic patients (p < 0.05). While the average number of teeth with caries per patient in the Type-1 diabetes group was 5, the average number of tooth loss per patient in the Type 2 group was 9. CONCLUSIONS: While Type-I diabetes could be a predisposing factor for dental caries, Type-II diabetes could be a predisposing factor for tooth loss.

Comparison of Postoperative Pain After the Utilization of Different File Systems in Single Visit Endodontics.

Purpose: This prospective single-blind, parallel-group, randomized clinical trial was aimed to compare the effect of three different rotary instrumentation systems ProTaper Next (PTN), Self-Adjusting File (SAF) and XP-endo Shaper (XPS) on postoperative pain and analgesic intakes. Patients and Methods: A total of 159 molars diagnosed with symptomatic irreversible pulpitis were randomly divided into three study groups according to the instrumentation techniques: PTN (n = 54), SAF (n = 52), and XPS (n = 53). The preoperative pain scores were taken before the onset of treatment in the groups. After a single appointment for root canal treatment, the patients were asked to rate the level of their pain according to the Visual Analog Scale (VAS) of 100 mm at 6, 24, 48, and 72-hour post-treatment intervals. Ibuprofen was prescribed to be taken while experiencing pain; patients were requested to note the number of pills consumed at intervals after treatment. Results: The patients in SAF and XPS groups had lower mean VAS scores than the PTN group at 24-, 48-, and 72-hour intervals (p < 0.05). The most common analgesic intake was optimally seen in the PTN group at a 6-hour interval. All shaping procedures caused postoperative pain, whose intensity decreased with time. Conclusion: The SAF and XPS groups had a lesser intensity of pain as well as minimum analgesic intakes as compared to the PTN group. All instrumentation systems moderately caused pain, and the PTN group experienced the highest pain among others.

Negotiating the second mesiobuccal canal: A comparison of nickel titanium files through the experience of undergraduate dental students.

OBJECTIVES: The aim of this study was to compare the ability of undergraduate students to reach working length (WL) in second mesiobuccal root canals (MB2) of maxillary first molars (n = 210) by using Reciproc Blue without glide path preparation, and One Curve with glide path preparation. METHODS: The students (n = 105) attended theoretical and practical courses. The first group (n = 53) shaped MB2 root canals using the One Curve system and then Reciproc Blue; the second group (n = 52) shaped MB2 root canals following the reverse sequence. Participants completed a questionnaire. The chi-square and Mann-Whitney U test were used for statistical analysis using significance of p < 0.05. RESULTS: The full WL was reached and shaping procedures were completed without complications in Reciproc Blue and One Curve groups at rates of 86.67% and 82.85%, respectively (p > 0.05). Treatment time was shorter in Reciproc Blue (p < 0.05). More (62.9%) students felt the One Curve system safer, while 61% felt the Reciproc Blue system faster. CONCLUSIONS: Within the limitations of this study, instrument kinematics and glide path preparation did not interfere with undergraduate students' ability to achieve the WL in MB2 root canals.

Resistance to fracture of simulated external cervical resorption cavities repaired with different materials.

The aim of the study was to evaluate the fracture resistance (FR) of teeth with simulated external cervical resorption (ECR) cavities repaired with different materials. Following the shaping of the 80 human permanent maxillary central incisors, standard ECR cavities were prepared and restored with a nanohybrid composite resin; a high viscosity GIC Equia Forte Fill; Biodentine; Biodentine + nanohybrid composite resin; MTA BIOREP; MTA BIOREP + nanohybrid composite resin. Then, the root canals were obturated with AH Plus and gutta-percha. The roots were embedded acrylic resin blocks and fracture strength test was applied. The highest FR was observed in the Biodentine group, while the lowest was in Equia group (p < 0.05). No significant results were observed among composite, Biodentine + composite, MTA BIOREP + composite and MTA BIOREP (p > 0.05). Biodentine may be a preferable material for repairing ECR cavities. Adding a composite layer on MTA BIOREP and Biodentine did not improve the FR of these materials.

Apical debris extrusion of full-sequenced rotary systems in narrow ribbon-shaped canals.

The apically extruded debris caused by TruNatomy System (TRN), RACE EVO system (RE) and VDW Rotate (VR) systems in mandibular anterior teeth with ribbon-shaped root canals were compared. The root canals (n = 20 in each group) were irrigated with NaOCl 2.5%, and the extruded debris was collected at pre-weighted Eppendorf tubes. The amount of apically extruded debris (mg) and the treatment time (s) were recorded. Tukey pairwise comparisons were performed to compare groups with a 95% confidence level. VR had significantly less debris extrusion values and treatment time than RE and TRN (P < 0.05). Although no difference was observed between RE and TRN in terms of apically extruded debris (P > 0.05), a significant difference in favour of RE was observed in terms of treatment time (P < 0.05). All the instruments extruded debris at varying weights.

How do reused glide path files affect the cyclic fatigue resistance? / ¿Cómo afecta la reutilización de limas tipo glide path su resistencia a la fatiga cíclica?

ABSTRACT: The aim of this study was to compare the cyclic fatigue resistance (CFR) of PathFile (Dentsply Sirona, Ballaigues, Switzerland) and ScoutRace (FKG Dentaire, La Chaux-de-Fonds, Switzerland) glide path files which were either new or previously used. Forty PathFile (PF) 19/.02 and 40 ScoutRace (SR) 20/.02 instruments were used for this study. Half of the files in each group were used (PF-U and SR-U) in the 3D demo tooth models (FKG Dentaire, La Chaux-de-Fonds, Switzerland) for creating glide paths, while the other half was new (PF-N and SR-N) and directly subjected to the cyclic fatigue test. The new and used files (n=80) were rotated in the cyclic fatigue test device with an artificial stainless-steel canal (60° curvature, 5 mm radius 1.5 mm width and 3.0 mm depth) under the continuous irrigation with distilled water at 37°C until fracture occurred. Time to fracture was recorded and the Weibull reliability analysis was performed. Data were statistically analysed. Conformity to normal distribution was examined using the Shapiro-Wilk test. A paired two-sample t-test was used to compare the TTF values according to the time within the groups. The new instruments (PF-N and SR-N) showed better CFR than the used groups (PF-U and SR-U) (P SR-N>PF-U>SR-U. Reuse of both glide path instruments reduced the time to fracture and the cyclic fatigue resistance of the files.

RESUMEN: El objetivo de este estudio fue comparar la resistencia a la fatiga cíclica (CFR en inglés) de las limas PathFile (Dentsply Sirona, Ballaigues, Suiza) y ScoutRace (FKG Dentaire, La Chaux-de-Fonds, Suiza) de tipo glide path, nuevas o ya previamente utilizadas. Para este estudio se utilizaron 40 instrumentos PathFile (PF) 19/.02 y 40 ScoutRace (SR) 20/.02. La mitad de las limas de cada grupo se utilizaron (PF-U y SR-U) en los modelos dentales de demostración 3D (FKG Dentaire, La Chaux-de- Fonds, Suiza) para crear trayectorias de deslizamiento, mientras que la otra mitad se utilizaron nuevas directamente a la prueba de fatiga cíclica (PF-N y SR-N). Las limas nuevas y usadas (n=80) se hicieron girar en el dispositivo de prueba de fatiga cíclica con un canal artificial de acero inoxidable (curvatura de 60°, radio de 5mm, anchura de 1,5mm y profundidad de 3,0mm) bajo irrigación continua con agua destilada a 37°C hasta que se produjo la fractura. Se registró el tiempo hasta la fractura y se realizó el análisis de fiabilidad de Weibull. Los datos se analizaron estadísticamente. La conformidad con la distribución normal se examinó mediante la prueba de Shapiro- Wilk. Se utilizó una prueba t de dos muestras pareadas para comparar los valores de TTF según el tiempo dentro de los grupos. Los instrumentos nuevos (PF-N y SR- N) mostraron una mejor CFR que los grupos previamente utilizados (PF-U y SR-U) (p SR-N >PF-U >SR-U. La reutilización de ambos instrumentos tipo glide path redujo el tiempo hasta la fractura y la resistencia a la fatiga cíclica de las limas.

Influence of different irrigation regimens on the dentinal tubule penetration of a bioceramic-based root canal sealer: a confocal analysis study.

This study aims to assess the efficacy of various irrigation protocols on the dentinal tubule penetration of a bioceramic-based endodontic sealer. Sixty-four single-rooted extracted human mandibular incisors were used. After instrumentation, teeth were randomly divided into the following four groups (n = 16 each) according to the final irrigation technique: group 1, conventional endodontic needle (CEN); group 2, EndoActivator (EA); group 3, Er,Cr: YSGG laser; group 4, XP-endo Finisher (XPF). The root canals were finally irrigated with 17% EDTA and 5.25% NaOCl for 1 min (min) respectively. The teeth were then obturated with Endosequence BC Points and rhodamine B dye-labeled BC Sealer. After 2 weeks, 1-mm-thick transverse sections were cut 2 and 5 mm from the apex, and examined by confocal laser scanning microscopy at 5 × magnification. The total percentage of sealer penetration (TPSP), sealer penetration area (SPA), and maximum sealer penetration depth (MSPD) was measured. Data were analyzed by Kruskal-Wallis, Dunn's multiple comparison, and Wilcoxon tests, with significance set at P < 0.05. At 2 mm level, no significant differences were detected among the groups (P > 0.05). At the 5 mm level, the XPF group showed significantly higher values for both TPSP and SPA in comparison with the Er,Cr: YSGG laser and CEN groups (P < 0.05), but no significant difference was observed with the EA group. The choice of different final irrigation techniques can affect dentinal tubule penetration.

Evaluation of the knowledge of final-year dental students on the use of antibiotics in endodontics in Turkey.

The knowledge of the final-year dental students on antibiotic use in endodontics in Turkey was assessed. The study was conducted at 20 Dentistry Faculties. A questionnaire was sent to the universities including the concerning several scenarios about endodontic cases. 1113 final-year dental students participated in the study. Respondents' significant choice was not to administrate antibiotics in endodontic treatments of symptomatic irreversible pulpitis, pulp necrosis, acute apical periodontitis, chronic apical abscess with or without sinus tract, retreatment, inadequate local anaesthesia and patient requests (P > 0.05). In acute apical abscess (AAA) with diffuse cases, choice of antibiotic administration was statistically higher (P < 0.05), while in AAA-localised cases, the ratio of antibiotic administration versus non-administration was similar. Amoxicillin was found to be the first-choice antibiotic in patients without medical allergies, whereas in allergic patients the first choice was clindamycin. Final-year dental students have fundamental knowledge on the antibiotic administration in endodontics.

A CBCT based digital analysis of shaping ability of Max Wire® alloy file in the treatment of large and curved root canals

Aim: To evaluate the limits of the shaping ability of MaxWire® alloy file in the treatment of pre-created large and curved root canals with different apical sizes by using cone-beam computed tomography (CBCT). Materials and methods: Forty-five permanent maxillary first molars with moderately curved palatal roots (20°-30°) were divided into three groups, and large root canals were created with apical diameter #35 (Group 1), #40 (Group 2) or #50 (Group 3) by using BioRace NiTi System. Then, they were reshaped with the MaxWire alloy file, XP-endo Shaper®. Canals were scanned before and after instrumentation by using the CBCT scanner. Canal transportation (CT), centering ratio (CR), % increased prepared area (PA), and % increased prepared outline (PO) at 2, 3, and 4 mm from the apex were calculated. Data were statistically analyzed at P < 0.05. Results: There was a significant difference in the mean increase in PO in all apical sizes and all three levels. At both 3 mm and 4 mm levels the maximum PA and PO were achieved in apical size 35, while at 2 mm level the maximum values were obtained in apical size 40. There was no statistically significant difference in CT and CR within groups at 2 mm distance from the apex. Conclusion: Max Wire alloy technology of this novel instrument makes it possible to clean and touch the dentin walls of large and curved root canals. Small FOV and small voxel size of CBCT could also be used in shaping ability studies in endodontics.

Accuracy of the Dentaport ZX apex locator for working length determination when retreating molar root canals.

The aim of this study was to evaluate the accuracy of the Dentaport ZX apex locator for working length determination during root canal retreatment of mandibular molars. Fifteen extracted mandibular first molars with separate mesial canals and apical foraminae and one distal canal were selected. The mesiobuccal and distal canals were investigated; the length with the file tip at the major diameter was defined as the tooth length (TL). The canals were prepared with ProTaper files to 1 mm short of this and filled with gutta-percha and AH Plus sealer. One week later, the root fillings were removed using ProTaper retreatment files. Tooth length was remeasured and recorded as the retreatment tooth length (RTL). Then electronic measurements were taken at the major (electronic apex locator (EAL) major) and minor (EAL minor) foraminae as suggested by the instrument display. These lengths were compared with RTL and measurements 0.5 and 1 mm short of this distance. For both canals, no significant difference was found between RTL and EAL major, and 0.5 mm short of RTL and EAL minor (P > 0.05). There were significant differences found between all other readings. The Dentaport ZX could not detect the minor foramen accurately but was able to indicate the major foramen in molars undergoing a root canal retreatment procedure.